Factory wholesale Graphite Electrodes Uses For Steel Making

Small diameter graphite electrode (Diameter: 75mm-225mm) main used for smelting calcium carbide, carborundum, white corundum, rare metals smelting, as refractory in Ferrosilicon plant, etc..

Our progress depends on the highly developed products ,great talents and repeatedly strengthened technology forces for Factory wholesale Custom Processing Graphite Electrode Carbon Conductive Preservative Nipple for Graphite Electrode Graphite Electrode Price, Our tenet is obvious each of the time: to deliver superior quality item at aggressive price tag to shoppers round the entire world. We welcome potential potential buyers to speak to us for OEM and ODM orders.
Our progress depends on the highly developed products ,great talents and repeatedly strengthened technology forces for China Graphite Electrodes and UHP Graphite Electrode, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 10 years.

Technical Parameter

NOTE:Any specific requirement on dimension can be offered.

Widely Application

RP graphite electrode is commonly used in LF (Ladle furnace) and EAF (Electric Arc Furnace) steelmaking. The electrode is highly compatible with these furnaces and provides excellent results. RP graphite electrode is also used in other applications like pre-baked anode and steel ladle.

Instruction For Handing And Using

1.Remove the protective cover of the new electrode hole, check whether the thread in the electrode hole is complete and the thread is incomplete, contact the professional engineers to determine whether the electrode can be used;
2.Screw the electrode hanger into the electrode hole at one end, and place the soft cushion under the other end of the electrode to avoid damaging the electrode joint; (see pic1)
3.Use compressed air to blow the dust and sundries on the surface and hole of the connecting electrode, and then clean the surface and connector of the new electrode, clean it with a brush; (see pic2)
4.Lift the new electrode above the pending electrode to align with the electrode hole and fall slowly;
5.Use a proper torque value to properly lock electrode; (see pic3)
6.Clamp holder should be placed out of the alarm line. (see pic4)
7.In the refining period, it is easy to make the electrode thin and cause breaking, joint fall off, increase electrode consumption, please don’t use electrodes to raise carbon content.
8.Due to the different raw materials used by each manufacturer and the manufacturing process, the physical and chemical properties of electrodes and joints of each manufacturer. So in use, under general circumstances, Please don’t mixed use electrodes and joints produced by different manufacturers.