Chinese Graphite Electrode Manufacturers 450mm Diameter RP HP UHP Graphite Electrodes
Technical Parameter
|
Parameter |
Part |
Unit |
RP 450mm(18”) Data |
|
Nominal Diameter |
Electrode |
mm(inch) |
450 |
|
Max Diameter |
mm |
460 |
|
|
Min Diameter |
mm |
454 |
|
|
Nominal Length |
mm |
1800/2400 |
|
|
Max Length |
mm |
1900/2500 |
|
|
Min Length |
mm |
1700/2300 |
|
|
Max Current Density |
KA/cm2 |
13-17 |
|
|
Current Carrying Capacity |
A |
22000-27000 |
|
|
Specific Resistance |
Electrode |
μΩm |
7.5-8.5 |
|
Nipple |
5.8-6.5 |
||
|
Flexural Strength |
Electrode |
Mpa |
≥8.5 |
|
Nipple |
≥16.0 |
||
|
Young’s Modulus |
Electrode |
Gpa |
≤9.3 |
|
Nipple |
≤13.0 |
||
|
Bulk Density |
Electrode |
g/cm3 |
1.55-1.64 |
|
Nipple |
≥1.74 |
||
|
C.T.E. |
Electrode |
×10-6/℃ |
≤2.4 |
|
Nipple |
≤2.0 |
||
|
Ash Content |
Electrode |
% |
≤0.3 |
|
Nipple |
≤0.3 |
NOTE:Any specific requirement on dimension can be offered.
Surface Quality Ruler
- The defects or holes should not more than two parts on the graphite electrode surface, and the defects or holes size not be allowed exceed the data in table below mentioned.
- There is no transverse crack on the electrode surface.For longitudinal crack,its length should be not more than 5% of the graphite electrode circumference,its width should be within 0.3-1.0mm range.Longitudinal crack data below 0.3mm data should be negligible
- The width of he rough spot(black) area on the graphite electrode surface should be not less than 1/10 of the graphite electrode circumference,and the length of rough spot(black) area over 1/3 of the graphite electrode length is not be allowed.
Surface Defect Data for Graphite Electrode
|
Nominal Diameter |
Defect Data(mm) |
||
|
mm |
inch |
Diameter(mm) |
Depth(mm) |
|
300-400 |
12-16 |
20–40 |
5–10 |
|
450-700 |
18-24 |
30–50 |
10–15 |
Related products
-
Furnace Graphite Electrode Small Diameter 75mm ...
Technical Parameter Chart 1:Technical Parameter For Small Diameter Graphite Electrode Diameter Part Resistance Flexural Strength Young Modulus Density C.T.E Ash Inch mm μΩ·m MPa GPa g/cm3 ×10-6/℃ % 3 75 Electrode 7.5-8.5 ≥9.0 ≤9.3 1.55-1.64 ≤2.4 ≤0.3 Nipple 5.8-6.5 ≥16.0 ≤13.0 ≥1.74 ≤2.0 ≤0.3 4 100 Electrode 7.5-8.5 ≥9.0 ≤9.3 1.55-1.64 ≤2.4 ≤0.3 Nip...
-
Graphite Electrodes Nipples 3tpi 4tpi Connectin...
Description The graphite electrode nipple is a small but essential part of the EAF steelmaking process. It is a cylindrical-shaped component that connects the electrode to the furnace. During the steelmaking process, the electrode is lowered into the furnace and placed in contact with the molten metal. Electrical current flows through the electrode, generating heat, which melts the metal in the furnace. The nipple plays a crucial role in maint...
-
High Power Graphite Electrode For EAF LF Smelti...
Technical Parameter Parameter Part Unit HP 350mm(14”) Data Nominal Diameter Electrode mm(inch) 350(14) Max Diameter mm 358 Min Diameter mm 352 Nominal Length mm 1600/1800 Max Length mm 1700/1900 Min Length mm 1500/1700 Current Density KA/cm2 17-24 Current Carrying Capacity A 17400-24000 Specific Resistance Electrode μΩm 5.2-6.5 Nipple 3.5-4.5 Flexur...
-
Small Diameter Furnace Graphite Electrode for e...
Technical Parameter Chart 1:Technical Parameter For Small Diameter Graphite Electrode Diameter Part Resistance Flexural Strength Young Modulus Density C.T.E Ash Inch mm μΩ·m MPa GPa g/cm3 ×10-6/℃ % 3 75 Electrode 7.5-8.5 ≥9.0 ≤9.3 1.55-1.64 ≤2.4 ≤0.3 Nipple 5.8-6.5 ≥16.0 ≤13.0 ≥1.74 ≤2.0 ≤0.3 4 100 Electrode 7.5-8.5 ≥9.0 ≤9.3 1.55-1.64 ≤2.4 ≤0.3 Nip...
-
Silicon Graphite Crucible For Metal Melting Cla...
Technical Parameter For Clay Graphite Crucible SIC C Modulus of Rupture Temperature Resistance Bulk Density Apparent Porosity ≥ 40% ≥ 35% ≥10Mpa 1790℃ ≥2.2 G/CM3 ≤15% Note:We can adjust the content of each raw material to produce the crucible according customers’ requirement. Description The graphite used in these crucibles is usually made...
-
Graphite Electrodes Uses Steelmaking With Nippl...
Technical Parameter Parameter Part Unit RP 500mm(20”) Data Nominal Diameter Electrode mm(inch) 500 Max Diameter mm 511 Min Diameter mm 505 Nominal Length mm 1800/2400 Max Length mm 1900/2500 Min Length mm 1700/2300 Max Current Density KA/cm2 13-16 Current Carrying Capacity A 25000-32000 Specific Resistance Electrode μΩm 7.5-8.5 Nipple 5.8-6.5 Flexur...
